Videos related to: PureStation™ Sink Insert

VIDEOSArray ( [0] => WP_Post Object ( [ID] => 1342 [post_author] => 5 [post_date] => 2016-10-17 14:46:00 [post_date_gmt] => 2016-10-17 14:46:00 [post_content] => [post_title] => PureStation™ Sink Insert [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => purestation-sink-insert [to_ping] => [pinged] => [post_modified] => 2023-04-03 14:51:45 [post_modified_gmt] => 2023-04-03 14:51:45 [post_content_filtered] => [post_parent] => 0 [guid] => https://pure-processing.com/?post_type=video&p=1342 [menu_order] => 8 [post_type] => video [post_mime_type] => [comment_count] => 0 [filter] => raw ) [1] => WP_Post Object ( [ID] => 4083 [post_author] => 6 [post_date] => 2020-05-18 16:08:41 [post_date_gmt] => 2020-05-18 16:08:41 [post_content] => [post_title] => Endoscopy Reprocessing Solutions [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => endoscopy-reprocessing-solutions-from-pure-processing [to_ping] => [pinged] => [post_modified] => 2023-04-03 14:52:50 [post_modified_gmt] => 2023-04-03 14:52:50 [post_content_filtered] => [post_parent] => 0 [guid] => https://pure-processing.com/?post_type=video&p=4083 [menu_order] => 22 [post_type] => video [post_mime_type] => [comment_count] => 0 [filter] => raw ) )
Array ( [0] => WP_Post Object ( [ID] => 243 [post_author] => 1 [post_date] => 2015-09-24 03:14:31 [post_date_gmt] => 2015-09-24 03:14:31 [post_content] =>

Goodbye deep sink basins, hello easier ergonomics

The PureStation™ Sink Insert fits into pre-existing sink basins to raise the work level and reduce deep back bending and injury. It makes staff more comfortable at the sink by easing the strain on backs and legs while additionally meeting The Joint Commission and OSHA standards for ergonomics. The PureStation Sink Insert improves efficiency by providing convenient ways to monitor and mix enzymatic solution concentrations. Each basin includes a replaceable thermometer strip, water volume indicators and a chemistry mixing well to make enzymatic use simpler and more consistent. The insert also includes a built-in device drain catch, which prevents small pieces from being lost down the drain. Plus, the handles on the sides of each insert also act as overflow drains to prevent spillage onto the floor. The lightweight, polyurethane construction of this sink insert makes it easy to place and remove from counters, deep sinks and mobile carts. Each insert comes with caddies to store small adapters, parts, brushes and solution. The insert can be used in mobile carts for storage, transport and soaking. Clear transport lids are also available that slip on top of each insert. The lids are easy to write on (or attach biohazard labels to) in order to label biohazardous materials and prevent cross-contamination. The FlexiPump Independent Flushing System can be included with the PureStation Sink Insert to add consistent, automated flushing into reprocessing practices. Note: Pure Processing can only provide pricing quotes with photos and dimensions of your existing sink. Please fill out dimensional request form to get started!   [product_request_info_btn] [gallery link="none" size="large" ids="2798,2593"] [post_title] => PureStation™ Sink Insert [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => sink-inserts [to_ping] => [pinged] => [post_modified] => 2024-02-01 17:23:01 [post_modified_gmt] => 2024-02-01 17:23:01 [post_content_filtered] => [post_parent] => 0 [guid] => https://pure-processing.com/?post_type=product&p=243 [menu_order] => 39 [post_type] => product [post_mime_type] => [comment_count] => 0 [filter] => raw ) [1] => WP_Post Object ( [ID] => 204 [post_author] => 1 [post_date] => 2015-09-24 02:57:32 [post_date_gmt] => 2015-09-24 02:57:32 [post_content] =>

Compliant ophthalmic / ocular device reprocessing

The PureStation™ Dedicated Eye Sink serves as a separate designated cleaning area for channeled ocular surgical devices. It is labeled with specific instructions for eye instruments to comply with ANSI/AAMI ST79 guidelines, and can be used on a counter top, in an existing sink to raise the work level, or in a mobile cart. The lightweight polyurethane construction makes it easy for sterile processing technicians to handle and provides a softer surface for delicate ophthalmic lumens and devices. The PureStation Dedicated Eye Sink also features water volume indicators and a thermometer strip to assure consistent solution dilution and temperatures. Caddies that secure onto the rim of the sink insert help organize cleaning tools and solutions at the sink, and a drain catch prevents small adapters from being lost down the drain. The PureStation™ Dedicated Eye Sink can also be used with the FlexiPump Independent Flushing System for copiously flushing ocular instruments. The FlexiPump system features integrated pressure relief valves to protect delicate eye instruments and allows up to five small-diameter lumens to be flushed at once.   “A designated cleaning area and equipment dedicated to the cleaning of intraocular surgical instruments should be identified. Intraocular surgical instruments should be processed separately from general surgical instruments and equipment to reduce the potential for cross-contamination by material or residue from general surgical instruments.” ANSI/AAMI ST79: 2017, M.2.2.2, Designated cleaning area and equipment   [product_request_info_btn] [gallery link="none" size="large" ids="4905,1180,2801,3887,207,4891"] [post_title] => PureStation™ Dedicated Eye Sink [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => purestation-dedicated-eye-sink [to_ping] => [pinged] => [post_modified] => 2024-02-12 16:19:52 [post_modified_gmt] => 2024-02-12 16:19:52 [post_content_filtered] => [post_parent] => 0 [guid] => https://pure-processing.com/?post_type=product&p=204 [menu_order] => 44 [post_type] => product [post_mime_type] => [comment_count] => 0 [filter] => raw ) [2] => WP_Post Object ( [ID] => 264 [post_author] => 1 [post_date] => 2015-09-24 03:27:07 [post_date_gmt] => 2015-09-24 03:27:07 [post_content] => Patent pending on the PureSteel™ EZ Hinge™ Pegboards. Engineered by sink experts who understand the reprocessing space, PureSteel™ Healthcare Reprocessing Sinks are the comprehensive stainless steel sink choice for sterile processing and gastroenterology departments. PureSteel™ Healthcare Reprocessing Sinks are high quality stainless steel sinks that feature electronic push button height adjustment so that each technician or nurse can meet their ergonomic requirements. An ergonomic wrist rest is also integrated to remove pinch points during reprocessing and reduce unnecessary wrist strain and injury. Height-adjustable undershelves, back wall pegboards, and enhanced lighting further improve worker ergonomics. The PureSteel™ Healthcare Reprocessing Sink’s posterior pegboard also adjusts automatically as the sink height changes. PureSteel Reprocessing Sinks can also feature an optional EZ Hinge™ Pegboard, which hinge down to allow staff to clean & disinfect behind plumbed sinks. EZ Hinge pegboards also allow adaptability; technicians can install new accessories, or completely reverse the workflow of a sink as needs change. Technicians can easily access power or utilities not usually accessible behind fixed equipment. Pure Processing offers a variety of optional accessories that can be added to the pegboard to free up counter space, organize tools near the user, and help make manual cleaning more efficient. PureSteel Healthcare Reprocessing Sinks are tailored to fit each unique department's needs. Standard and custom configurations are available. [product_request_info_btn] [gallery size="large" link="none" ids="6071,6928,6925,6926,5370,5373,5374,5375"]  
[post_title] => PureSteel™ Healthcare Reprocessing Sink [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => healthcare-reprocessing-sink [to_ping] => [pinged] => [post_modified] => 2023-08-08 19:20:50 [post_modified_gmt] => 2023-08-08 19:20:50 [post_content_filtered] => [post_parent] => 0 [guid] => https://pure-processing.com/?post_type=product&p=264 [menu_order] => 36 [post_type] => product [post_mime_type] => [comment_count] => 0 [filter] => raw ) [3] => WP_Post Object ( [ID] => 924 [post_author] => 5 [post_date] => 2016-05-27 14:39:56 [post_date_gmt] => 2016-05-27 14:39:56 [post_content] => The PureSteel™ Xi Reprocessing Sink is a healthcare reprocessing sink that can create a dedicated area for specific instrument reprocessing or increase a department's sink space without expensive construction or renovation. The Xi Sink has a small footprint that is designed to easily accommodate a variety of larger minimally invasive surgical and robotic instruments. The 8" basin depth minimizes deep back bending but still allows proper depth for soaking and instrument trays. The XI Sink also features a back wall panel to organize tools for reprocessing at a convenient height. The Xi Sink is built with ergonomically friendly features recommended by OSHA and ANSI/AAMI guidelines. Slanted wrist edges at the edge of the sink basin help to minimize strain and injury during long hours of reprocessing. In addition, optional height-adjustment functions allow the sink to match the individual user to remove bending and strain. [product_request_info_btn] [gallery ids="6177,6176"] [post_title] => PureSteel™ Xi Reprocessing Sink [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => puresteel-xi-reprocessing-sink [to_ping] => [pinged] => [post_modified] => 2023-08-16 19:45:51 [post_modified_gmt] => 2023-08-16 19:45:51 [post_content_filtered] => [post_parent] => 0 [guid] => https://pure-processing.com/?post_type=product&p=924 [menu_order] => 34 [post_type] => product [post_mime_type] => [comment_count] => 0 [filter] => raw ) [4] => WP_Post Object ( [ID] => 3220 [post_author] => 5 [post_date] => 2019-04-10 19:02:09 [post_date_gmt] => 2019-04-10 19:02:09 [post_content] => The PureSteel™ Endoscopy Sink creates a dedicated space for endoscopy departments to soak, flush and rinse flexible and rigid endoscopes per guidelines and recommendations. All the ergonomic, productivity and compliance benefits as our PureSteel Reprocessing Sinks, additional customizations can be made to suit rigid and flexible scope reprocessing, including temperature gauges to provide constant readouts of solution temperatures, and in-basin lighting for enhanced leak testing. Sink systems can be custom sized to fit in unique spaces in gastroenterology suites and departments, with varying basin sizes or layouts. Height-adjustable or fixed options are available. PureSteel Endoscopy Sinks can also be fitted with pegboards or back walls to organize cleaning accessories, channel electrical, and organize sink spaces. PureSteel EZ Hinge™ Pegboards are another optional feature that allow technicians and nurses to hinge entire pegboards down to clean behind sinks, access power, or re-organize and install accessories. Patent pending on the PureSteel™  EZ Hinge™  Pegboards. [product_request_info_btn] [gallery ids="3874,6924,3221,6878,6919,6920,6923,6922,3873,6921"]
[post_title] => PureSteel™ Endoscopy Sink [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => puresteel-endoscopy-sink [to_ping] => [pinged] => [post_modified] => 2023-08-08 20:42:33 [post_modified_gmt] => 2023-08-08 20:42:33 [post_content_filtered] => [post_parent] => 0 [guid] => https://pure-processing.com/?post_type=product&p=3220 [menu_order] => 12 [post_type] => product [post_mime_type] => [comment_count] => 0 [filter] => raw ) [5] => WP_Post Object ( [ID] => 2241 [post_author] => 5 [post_date] => 2018-04-20 14:53:34 [post_date_gmt] => 2018-04-20 14:53:34 [post_content] =>

Maximize Department Space, Minimize Bottlenecks

The PureSteel™ Mobile Soaking Station delivers dedicated spaces for soaking and cleaning surgical instruments and endoscopes. The Mobile Soaking Station is perfect for horizontally soaking robotics, endoscopes, larger orthopedic instruments or surgical instruments with longer soak times, as stipulated in IFU. The Mobile Soaking Station is built on casters for mobile use and includes an organizational back wall to organize cleaning and soaking accessories, without taking up additional counter space. Mobile Soaking Stations can be outfitted with electrical, a PureSoak™ Waterproof Timer , PureChannel™ Flush Touchless Auto Dispenser, and FlexiPump™ Independent Flushing System to create secondary reprocessing sink. The Mobile Soaking Station can be purchased with a faucet and hard-plumbed, when needed.   [product_request_info_btn] [gallery ids="6070,6069,4251,4252"]  
[post_title] => PureSteel™ Mobile Soaking Station [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => puresteel-mobile-soaking-station [to_ping] => [pinged] => [post_modified] => 2024-02-05 19:19:51 [post_modified_gmt] => 2024-02-05 19:19:51 [post_content_filtered] => [post_parent] => 0 [guid] => https://pure-processing.com/?post_type=product&p=2241 [menu_order] => 25 [post_type] => product [post_mime_type] => [comment_count] => 0 [filter] => raw ) [6] => WP_Post Object ( [ID] => 225 [post_author] => 1 [post_date] => 2015-09-24 03:09:17 [post_date_gmt] => 2015-09-24 03:09:17 [post_content] => The PureStation™ Mobile Cart assures easy transport and storage of instruments during pre-cleaning. PureStation Sink Inserts fit perfectly into the top frame of the mobile cart to provide an additional functional sink during peak processing hours. The PureStation cart can enable point-of-use pre-cleaning in a procedure room, and once covered, it safely transports instruments to the reprocessing department. It can also be used as a dedicated pre-cleaning area for instruments, or for training and testing to help develop a copious flushing protocol. Mobile carts are also available in three-tier and four-tier models. PureStation Four Tier Transport Cart features four PureStation Sink Inserts for departments that require vertical soaking, storage and transport capabilities. [product_request_info_btn] [gallery link="none" size="large" ids="2301,2796,1465"] [post_title] => PureStation™ Mobile Cart [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => mobile-carts [to_ping] => [pinged] => [post_modified] => 2023-11-28 17:56:59 [post_modified_gmt] => 2023-11-28 17:56:59 [post_content_filtered] => [post_parent] => 0 [guid] => https://pure-processing.com/?post_type=product&p=225 [menu_order] => 40 [post_type] => product [post_mime_type] => [comment_count] => 0 [filter] => raw ) [7] => WP_Post Object ( [ID] => 178 [post_author] => 1 [post_date] => 2015-09-24 02:27:04 [post_date_gmt] => 2015-09-24 02:27:04 [post_content] =>

Save your department 100’s of hours from manual flushing practices; ensure consistent practice, every time

The FlexiPump™ Independent Flushing System is a hands-free automatic flushing pump that replaces syringes and spray guns for manual cleaning. Unlike syringes and spray guns, the FlexiPump can clean up to three instruments at once and has pre-programmed flush cycles for consistent and standardized flushing. Every sterile processing technician and gastroenterology nurse follows the same cleaning process every time. The FlexiPump tube sets come with built-in pressure-relief valves to protect delicate eye instruments, robotics, and suction tips from excess pressure, meeting specific pressure IFU guidelines. The FlexiPump also has a special Impact Cycle to safely remove tough soils and clogs from internal channels. While the FlexiPump cleans multiple devices simultaneously, technicians and nurses are free to perform other tasks. With hands-free flushing, they also avoid the repetitive motion pain and injuries associated with using syringes or holding a spray gun. [product_request_info_btn] [gallery ids="4112,4113,3865,2514,4115"]  
 
[post_title] => FlexiPump™ Independent Flushing System [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => flexipump-independent-flushing-system [to_ping] => [pinged] => [post_modified] => 2024-02-21 20:18:46 [post_modified_gmt] => 2024-02-21 20:18:46 [post_content_filtered] => [post_parent] => 0 [guid] => https://pure-processing.com/?post_type=product&p=178 [menu_order] => 47 [post_type] => product [post_mime_type] => [comment_count] => 0 [filter] => raw ) )
PureStation™ Sink Insert
Array ( [0] => WP_Post Object ( [ID] => 3220 [post_author] => 5 [post_date] => 2019-04-10 19:02:09 [post_date_gmt] => 2019-04-10 19:02:09 [post_content] => The PureSteel™ Endoscopy Sink creates a dedicated space for endoscopy departments to soak, flush and rinse flexible and rigid endoscopes per guidelines and recommendations. All the ergonomic, productivity and compliance benefits as our PureSteel Reprocessing Sinks, additional customizations can be made to suit rigid and flexible scope reprocessing, including temperature gauges to provide constant readouts of solution temperatures, and in-basin lighting for enhanced leak testing. Sink systems can be custom sized to fit in unique spaces in gastroenterology suites and departments, with varying basin sizes or layouts. Height-adjustable or fixed options are available. PureSteel Endoscopy Sinks can also be fitted with pegboards or back walls to organize cleaning accessories, channel electrical, and organize sink spaces. PureSteel EZ Hinge™ Pegboards are another optional feature that allow technicians and nurses to hinge entire pegboards down to clean behind sinks, access power, or re-organize and install accessories. Patent pending on the PureSteel™  EZ Hinge™  Pegboards. [product_request_info_btn] [gallery ids="3874,6924,3221,6878,6919,6920,6923,6922,3873,6921"]
[post_title] => PureSteel™ Endoscopy Sink [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => puresteel-endoscopy-sink [to_ping] => [pinged] => [post_modified] => 2023-08-08 20:42:33 [post_modified_gmt] => 2023-08-08 20:42:33 [post_content_filtered] => [post_parent] => 0 [guid] => https://pure-processing.com/?post_type=product&p=3220 [menu_order] => 12 [post_type] => product [post_mime_type] => [comment_count] => 0 [filter] => raw ) [1] => WP_Post Object ( [ID] => 1760 [post_author] => 5 [post_date] => 2017-06-29 18:19:08 [post_date_gmt] => 2017-06-29 18:19:08 [post_content] => PureClear™ Inspection Scopes allow technicians and nurses to visually inspect internal channel surfaces of lumened instrumentation, including flexible & rigid scopes, shavers, orthopedic, and more.  Hard-to-reach areas like elevator channels can be inspected to confirm functional integrity, ensure removal of all debris, and document the cleaning process, helping meet device IFU and national guidelines. Multiple scope lengths and outer diameters ensure that channels, connection points, distal tips, spaces behind elevator channels, and any small channels can be inspected and documented with video and high-resolution photography. Documentation includes date, device ID, and time stamps for thorough surveillance. PureClear Borescopes can be integrated with computer systems, or used with standalone monitors for visual display only. [product_request_info_btn] [gallery ids="5510,5507,5511,5512,5505,5513,9639"]
"...more healthcare-associated outbreaks have been linked to contaminated endoscopes than to any other medical device." -CDC Guidelines for Disinfection and Sterilization in Healthcare Facilities, 2008
 
[post_title] => PureClear™ Inspection Scopes [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => pureclear-inspection-scopes [to_ping] => [pinged] => [post_modified] => 2024-02-23 13:30:40 [post_modified_gmt] => 2024-02-23 13:30:40 [post_content_filtered] => [post_parent] => 0 [guid] => https://pure-processing.com/?post_type=product&p=1760 [menu_order] => 30 [post_type] => product [post_mime_type] => [comment_count] => 0 [filter] => raw ) [2] => WP_Post Object ( [ID] => 2224 [post_author] => 5 [post_date] => 2018-04-19 19:11:47 [post_date_gmt] => 2018-04-19 19:11:47 [post_content] => The PureClear™ Visualization Station creates dedicated staging for visual inspection procedures. The station integrates internal and external visual inspection, video displays, height-adjustability, and organizational back wall panel to create spaces built around each facility's specific needs and workflow. The PureClear™ Visualization Station can be integrated in the decontamination room to create visual inspection protocol before further reprocessing. Casters also allow the unit mobility for changing department workflows. [product_request_info_btn] [gallery ids="7839,7838,7837"]  
[post_title] => PureClear™ Visualization Station [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => pureclear-visualization-station [to_ping] => [pinged] => [post_modified] => 2023-08-08 19:35:55 [post_modified_gmt] => 2023-08-08 19:35:55 [post_content_filtered] => [post_parent] => 0 [guid] => https://pure-processing.com/?post_type=product&p=2224 [menu_order] => 27 [post_type] => product [post_mime_type] => [comment_count] => 0 [filter] => raw ) [3] => WP_Post Object ( [ID] => 243 [post_author] => 1 [post_date] => 2015-09-24 03:14:31 [post_date_gmt] => 2015-09-24 03:14:31 [post_content] =>

Goodbye deep sink basins, hello easier ergonomics

The PureStation™ Sink Insert fits into pre-existing sink basins to raise the work level and reduce deep back bending and injury. It makes staff more comfortable at the sink by easing the strain on backs and legs while additionally meeting The Joint Commission and OSHA standards for ergonomics. The PureStation Sink Insert improves efficiency by providing convenient ways to monitor and mix enzymatic solution concentrations. Each basin includes a replaceable thermometer strip, water volume indicators and a chemistry mixing well to make enzymatic use simpler and more consistent. The insert also includes a built-in device drain catch, which prevents small pieces from being lost down the drain. Plus, the handles on the sides of each insert also act as overflow drains to prevent spillage onto the floor. The lightweight, polyurethane construction of this sink insert makes it easy to place and remove from counters, deep sinks and mobile carts. Each insert comes with caddies to store small adapters, parts, brushes and solution. The insert can be used in mobile carts for storage, transport and soaking. Clear transport lids are also available that slip on top of each insert. The lids are easy to write on (or attach biohazard labels to) in order to label biohazardous materials and prevent cross-contamination. The FlexiPump Independent Flushing System can be included with the PureStation Sink Insert to add consistent, automated flushing into reprocessing practices. Note: Pure Processing can only provide pricing quotes with photos and dimensions of your existing sink. Please fill out dimensional request form to get started!   [product_request_info_btn] [gallery link="none" size="large" ids="2798,2593"] [post_title] => PureStation™ Sink Insert [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => sink-inserts [to_ping] => [pinged] => [post_modified] => 2024-02-01 17:23:01 [post_modified_gmt] => 2024-02-01 17:23:01 [post_content_filtered] => [post_parent] => 0 [guid] => https://pure-processing.com/?post_type=product&p=243 [menu_order] => 39 [post_type] => product [post_mime_type] => [comment_count] => 0 [filter] => raw ) [4] => WP_Post Object ( [ID] => 178 [post_author] => 1 [post_date] => 2015-09-24 02:27:04 [post_date_gmt] => 2015-09-24 02:27:04 [post_content] =>

Save your department 100’s of hours from manual flushing practices; ensure consistent practice, every time

The FlexiPump™ Independent Flushing System is a hands-free automatic flushing pump that replaces syringes and spray guns for manual cleaning. Unlike syringes and spray guns, the FlexiPump can clean up to three instruments at once and has pre-programmed flush cycles for consistent and standardized flushing. Every sterile processing technician and gastroenterology nurse follows the same cleaning process every time. The FlexiPump tube sets come with built-in pressure-relief valves to protect delicate eye instruments, robotics, and suction tips from excess pressure, meeting specific pressure IFU guidelines. The FlexiPump also has a special Impact Cycle to safely remove tough soils and clogs from internal channels. While the FlexiPump cleans multiple devices simultaneously, technicians and nurses are free to perform other tasks. With hands-free flushing, they also avoid the repetitive motion pain and injuries associated with using syringes or holding a spray gun. [product_request_info_btn] [gallery ids="4112,4113,3865,2514,4115"]  
 
[post_title] => FlexiPump™ Independent Flushing System [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => flexipump-independent-flushing-system [to_ping] => [pinged] => [post_modified] => 2024-02-21 20:18:46 [post_modified_gmt] => 2024-02-21 20:18:46 [post_content_filtered] => [post_parent] => 0 [guid] => https://pure-processing.com/?post_type=product&p=178 [menu_order] => 47 [post_type] => product [post_mime_type] => [comment_count] => 0 [filter] => raw ) [5] => WP_Post Object ( [ID] => 264 [post_author] => 1 [post_date] => 2015-09-24 03:27:07 [post_date_gmt] => 2015-09-24 03:27:07 [post_content] => Patent pending on the PureSteel™ EZ Hinge™ Pegboards. Engineered by sink experts who understand the reprocessing space, PureSteel™ Healthcare Reprocessing Sinks are the comprehensive stainless steel sink choice for sterile processing and gastroenterology departments. PureSteel™ Healthcare Reprocessing Sinks are high quality stainless steel sinks that feature electronic push button height adjustment so that each technician or nurse can meet their ergonomic requirements. An ergonomic wrist rest is also integrated to remove pinch points during reprocessing and reduce unnecessary wrist strain and injury. Height-adjustable undershelves, back wall pegboards, and enhanced lighting further improve worker ergonomics. The PureSteel™ Healthcare Reprocessing Sink’s posterior pegboard also adjusts automatically as the sink height changes. PureSteel Reprocessing Sinks can also feature an optional EZ Hinge™ Pegboard, which hinge down to allow staff to clean & disinfect behind plumbed sinks. EZ Hinge pegboards also allow adaptability; technicians can install new accessories, or completely reverse the workflow of a sink as needs change. Technicians can easily access power or utilities not usually accessible behind fixed equipment. Pure Processing offers a variety of optional accessories that can be added to the pegboard to free up counter space, organize tools near the user, and help make manual cleaning more efficient. PureSteel Healthcare Reprocessing Sinks are tailored to fit each unique department's needs. Standard and custom configurations are available. [product_request_info_btn] [gallery size="large" link="none" ids="6071,6928,6925,6926,5370,5373,5374,5375"]  
[post_title] => PureSteel™ Healthcare Reprocessing Sink [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => healthcare-reprocessing-sink [to_ping] => [pinged] => [post_modified] => 2023-08-08 19:20:50 [post_modified_gmt] => 2023-08-08 19:20:50 [post_content_filtered] => [post_parent] => 0 [guid] => https://pure-processing.com/?post_type=product&p=264 [menu_order] => 36 [post_type] => product [post_mime_type] => [comment_count] => 0 [filter] => raw ) [6] => WP_Post Object ( [ID] => 924 [post_author] => 5 [post_date] => 2016-05-27 14:39:56 [post_date_gmt] => 2016-05-27 14:39:56 [post_content] => The PureSteel™ Xi Reprocessing Sink is a healthcare reprocessing sink that can create a dedicated area for specific instrument reprocessing or increase a department's sink space without expensive construction or renovation. The Xi Sink has a small footprint that is designed to easily accommodate a variety of larger minimally invasive surgical and robotic instruments. The 8" basin depth minimizes deep back bending but still allows proper depth for soaking and instrument trays. The XI Sink also features a back wall panel to organize tools for reprocessing at a convenient height. The Xi Sink is built with ergonomically friendly features recommended by OSHA and ANSI/AAMI guidelines. Slanted wrist edges at the edge of the sink basin help to minimize strain and injury during long hours of reprocessing. In addition, optional height-adjustment functions allow the sink to match the individual user to remove bending and strain. [product_request_info_btn] [gallery ids="6177,6176"] [post_title] => PureSteel™ Xi Reprocessing Sink [post_excerpt] => [post_status] => publish [comment_status] => closed [ping_status] => closed [post_password] => [post_name] => puresteel-xi-reprocessing-sink [to_ping] => [pinged] => [post_modified] => 2023-08-16 19:45:51 [post_modified_gmt] => 2023-08-16 19:45:51 [post_content_filtered] => [post_parent] => 0 [guid] => https://pure-processing.com/?post_type=product&p=924 [menu_order] => 34 [post_type] => product [post_mime_type] => [comment_count] => 0 [filter] => raw ) )
Endoscopy Reprocessing Solutions